MQ8 Hydrogen Gas Sensor Module

 199.00

A sensitive material MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection use in clean air low conductivity tin oxide (SnO2). When there is the environment in which the combustible gas sensor, conductivity sensor with increasing concentration of combustible gases in air increases.

Temperature & Humidity Sensor DHT 11

 149.00

This DHT11 Temperature and Humidity Sensor features a calibrated digital signal output with the temperature and humidity sensor capability. It is integrated with a high performance 8-bit microcontroller. It's technology ensures the high reliability and excellent long-term stability. This sensor includes a resistive element and a sensor for wet NTC temperature measuring devices. It has excellent quality, fast response, anti-interference ability and high performance.

16x2 LCD

 149.00

LCD (Liquid Crystal Display) screen is an electronic display module and find a wide range of applications. A 16x2 LCD display is very basic module and is very commonly used in various devices and circuits. These modules are preferred over seven segments and other multi segment LEDs. A 16x2 LCD means it can display 16 characters per line and there are 2 such lines. In this LCD each character is displayed in 5x7 pixel matrix. This LCD has two registers, namely, Command and Data.

Features:

• 5 x 8 dots with cursor
• Built-in controller (KS 0066 or Equivalent)
• +5V power supply (Also available for + 3V)
• 1/16 duty cycle
• H/L to be driven by pin 1, pin 2 or pin 15, pin 16 or A.K (LED)
• N.V. optional for + 3V power supply

Raspberry Pi 3 Model B+

 3490.00

The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT. The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market. The Raspberry Pi 3 Model B+ maintains the same mechanical footprint as both the Raspberry Pi 2 Model B and the Raspberry Pi 3 Model B.

SPECIFICATIONS INCLUDE

•    Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
•    1GB LPDDR2 SDRAM
•    2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
•    Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
•    Extended 40-pin GPIO header
•    Full-size HDMI
•    4 USB 2.0 ports
•    CSI camera port for connecting a Raspberry Pi camera
•    DSI display port for connecting a Raspberry Pi touch screen display
•    4-pole stereo output and composite video port
•    Micro SD port for loading your operating system and storing data
•    5V/2.5A DC power input
•    Power-over-Ethernet (PoE) support (requires separate PoE HAT)

Raspberry Pi Tinkering Kit

 6990.00

'Raspberry Pi Tinkering' kit is the perfect aid to consolidate one's hold of the 'Embedded Systems' domain...and move on to the newer technologies of today IoT, EI & AI!!

Raspberry Pi is the SBC (Single Board Computer) of choice with the following 'hardware' features that render it so 'potent':

• Raspberry Pi 3 B+ board
• 1.4GHz 64-bit quad-core processor
• Dual-band Wireless LAN - 2.4/5GHz. 802.11b/g/n/ac
• Fast Ethernet - 10/100 w/ Power-over-Ethernet support (HAT)
• Bluetooth 4.2/BLE
• HDMI - 4K/ FHD
• Comp AV
• CSI & DSI Interafces
• Serial TTL, SPI, I2C, I2S, PWM, Ext. Interrupts, GPIOs

On top of the state-of-the-art hardware mentioned above, R Pi comes with a Linux (Debian) variant, Raspbian, providing for an extremely secure, robust OS platform which is any administrator's delight - what with the tweaks that one can apply, including the ones at the 'kernel' level that can add higher levels of performance, security & even functionality to the board!

The kit has been very thoughtfully made with every component, designed by our experts deploying cutting-edge techniques, playing a significant role in ensuring smooth, seamless learning of the technologies of today! One can build almost anything under the Sun - Automation - Local/ Remote, IoT, EI or/ and AI solutions/ projects using this kit...

'Components' included in the kit are:

• 8 GB memory card
• 5V/2.5A Adapter with Micro USB Cable
• LED - Red
• Push Button Switch
• IR Sensor Module
• LDR
• 7-segment LED Display
• LCD Module - 16x2
• L293 Driver IC
• DC Motor
• Ultrasonic Sensor HC SR04
• LM35 Temperature sensor
• ADC 0804 IC
• PIR Sensor Module
• Variable Resistor - 10K
• Resistors - Different Values
• Capacitors - Different Types & Values
• Breadboard
• Jumper Wires - M-M
• Jumper Wires - F-F
• 9V battery

Breadboard - 800 Points

 89.00

A breadboard is a solderless device for temporary prototype with electronics and test circuit designs. Breadboards are used for rapid prototyping of electronic projects, without needing to solder the components to make it work. Most electronic components in electronic circuits can be interconnected by inserting their leads or terminals into the holes and then making connections through wires where appropriate. The breadboard has strips of metal underneath the board and connects the holes on the top of the board.

This is a Full size breadboard or standard size breadboard with 800 tie points, the breadboard measures 55mm x 170mm, you can combine two or more of this breadboard to make larger or wider breadboards, it also includes an adhesive foam at the back, to mount it securely on most surfaces.

Node MCU

 399.00

NodeMCU is an open source IoT platform. It includes firmware which runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module.

LEDs - Yellow

 99.00

A light-emitting diode (LED) is a semiconductor light source that emits light when current flows through it. Electrons in the semiconductor recombine with electron holes, releasing energy in the form of photons. The color of the light (corresponding to the energy of the photons) is determined by the energy required for electrons to cross the band gap of the semiconductor.

">

LEDs - White

 99.00

A light-emitting diode (LED) is a semiconductor light source that emits light when current flows through it. Electrons in the semiconductor recombine with electron holes, releasing energy in the form of photons. The color of the light (corresponding to the energy of the photons) is determined by the energy required for electrons to cross the band gap of the semiconductor.

Button Switch Set

 799.00

A push-button (also spelled pushbutton) or simply button is a simple switch mechanism for controlling some aspect of a machine or a process. Buttons are typically made out of hard material, usually plastic or metal. The surface is usually flat or shaped to accommodate the human finger or hand, so as to be easily depressed or pushed. 

MQ5 Methane Liquified Gas Sensor

 199.00

The Grove -Gas Sensor(MQ5) module is useful for gas leakage detection (in home and industry). It is suitable for detecting H2, LPG, CH4, CO, Alcohol the detection of certain components in the air usually requires a more precise and costly instrument, which cannot be done with a single gas sensor.

Capacitive Touch Switch Module

 99.00