21490.00
6999.00
4990.00
4990.00
2596.00
2590.00
1990.00
1799.00
1499.00
1299.00
1099.00
999.00
999.00
899.00
899.00
699.00
690.00
549.00
549.00
549.00
449.00
399.00
399.00
349.00
299.00
299.00
299.00
299.00
249.00
249.00
249.00
249.00
249.00
249.00
249.00
249.00
249.00
239.00
224.00
219.00
199.00
199.00
199.00
199.00
199.00
199.00
199.00
199.00
199.00
149.00
149.00
119.00
99.00
99.00
99.00
99.00
71.00
49.00
49.00
29.00
29.00
Rechargeable Battery Charger
299.00
Specifications:
- Specially designed for 9 Volt Li-Ion Rechargeable batteries
- Input: 100 - 240 VAC 50/60 Hz
- Output: 8.4V 300 mAh
- Dimension: 3.5'' L x 1.5'' W x 1" H.
Features:
- Multi Voltage for International Travel
- Power Portable
- Built in IC to cut off power automatically when battery is fully charge
- Intelligent charger designed for all types of 7.2V (2 cells) Li-Ion / Li-Poly Battery packs.
- 9V two button connector installed on the charger
- Red LED indicate battery is charging, and Green LED shows full. (LED also is Green without battery)
- Compact size and lightweight easy to carry for RC air/car
Note:
Should only be used with:
9 Volt Powerizer Lithium Ion Battery (500 mAh)
Solder Paste
49.00
A solder paste is essentially powder metal solder suspended in a thick medium called flux. Flux is added to act as a temporary adhesive, holding the components until the soldering process melts the solder and fuses the parts together. The paste is a grey, putty-like material.
Safety Goggles 3M
199.00
Safety Goggles, or glasses, are forms of protective eyewear that usually enclose or protect the area surrounding the eye in order to prevent particulates, water or chemicals from striking the eyes.They are used in chemistry laboratories, metal and wood working. Another area of application is in snow sports and swimming.
Allen Key Set
299.00
A Hex key, Allen key or an Allen wrench is a simple tool used to drive bolts and screws with hexagonal sockets in their heads.
Brand: Taparia
Screwdriver Set Multi-purpose
999.00
A ratcheting screwdriver is used for tightening and loosening screws the advantage of a ratcheting screwdriver over a regular screwdriver is that the user needs to keep their hands in the same position while holding the handle and has to rotate the handle to set the screw.
Brand: CIC - 41 Pcs.
Hot Glue Gun
299.00
A hot glue gun is a very useful tool for joining modelling materials and even stronger material can be fixed together with it. 'Sticks' of solid glue are pushed into the back of the gun, the trigger is pressed pushing the glue stick forward and molten glue comes out of the nozzle.
Soldering Station Siron
1990.00
Unlike other soldering iron features a specific characteristic of variable wattage.The changing wattage setting makes it the most versatile and useful for various types of applications.The temperature range of the iron is 28C to 45C with hi-tech printed ceramic heater for high-end use. The wattage setting is convenient, which makes it quite user friendly while handling. It comes with aluminum-coated bit for long lasting life.
Soldering Iron
199.00
This is a Temperature Controlled Soldering Iron. It is with ceramic heater and has a very high heat recovery characteristic. Its bits can be changed easily. Various bits can be used with this iron as per the requirement. All bits are Iron Plated and Tin covered. Temperature adjustment is easy. Set is supplied with stand to hold soldering iron and sponge.
Dual Temperature Heat Gun Stanley
1799.00
Black & Decker HG1300 Dual Temperature Heat Gun has 2 temperature settings (750C and 1000C) used for a variety of applications. It can be used for removing paint and varnish, loosening rusted nuts and bolts, thaw frozen pipes, or quick dry almost anything.
Soldering Helping Hand
690.00
A helping hand or also called 'third hand' is a stand with two flexible clamps that hold pieces in place for you, leaving your hands free to perform your work. It is really handy in jobs like soldering, jewelry making and other crafts.
Digital Vernier Caliper
1099.00
The Digital Caliper (sometimes incorrectly called the Digital Vernier Caliper) is a precision instrument that can be used to measure internal and external distances extremely accurately. Typically the distances/ measurements are read on an LCD display.
Digital Pen Electric Tester Taparia
199.00
The tip of the tester is touched to the conductor being tested (for instance, it can be used on a wire in a switch, or inserted into a hole of an electric socket). A neon lamp takes very little current to light, and thus can use the user's body capacitance to earth ground to complete the circuit.
Hacksaw
299.00
A hacksaw is a fine-toothed saw, originally and mainly made for cutting metal. The equivalent saw for cutting wood is usually called bow saw. Most hacksaws are hand saws with a C-shaped frame that holds a blade under tension.
Brand: De-Neers
Long Nose Plier
219.00
These pliers can bend, cut and grip where fingers and other tools are too big or clumsy. Needle-nose pliers are good for reaching into tight spots where regular pliers are unwieldy. They can grip multiple wires and even pick up small screws with a strong secure grip.
Combination Mini Plier
249.00
Pliers that can be used either for holding objects or for cutting and bending wires.
Brand: De-Neers
C-Clamp
149.00
A C-clamp or G-clamp is a type of clamp device typically used to hold a wooden or metal workpiece, and often used in, but are not limited to, carpentry and welding.
Vice Normal
549.00
Machine vices are mounted on drill presses, grinding machines and milling machines. Abrasive chop saws have a special type of machine vise built into the saw. Some hobbyists use a machine vice as a bench vice because of the low cost and small size.
Wire Stripper
99.00
A wire stripper is a small, hand-held tool used to strip the electrical insulation from electric wires.
Brand: Multitec
Return Measuring Tape Stanley
249.00
On a standard tape measure, the biggest marking is the 'inch'. As the length decreases, so does the mark size. For example, ½" has a bigger mark than ¼" which has a bigger mark than â…›", and so on.
Peg Board
699.00
The holes are used to accept pegs or hooks to support various items, such as tools in a workshop. Peg-Board is an expired trademark used as a brand name by the Masonite Corporation, first used in 1962, which is often used as a generic term for perforated storage boards made of hard board, wood, metal, or other material.
Brand: Alkon
Ball Pein Hammer
199.00
A ball peen hammer is a good choice for working with metals. Its steel head is harder than that of a claw hammer, so is less likely to chip on impact. Ball peen hammers are commonly used to drive cold chisels, set rivets as well as bend and shape metal.
Brand- De-Neers
Steel Shaft Claw Hammer
199.00
A claw hammer is a tool primarily used for driving nails into, or pulling nails from some other object It is not suitable for heavy hammering on metal surfaces (such as in machining works), as the steel of its head is somewhat brittle the ball-peen hammer is more suitable for such metal work.
Drilling Workstation
6999.00
The Dremel 220 Workstation Combined Drill Press and Tool Holder is a drill press, tool holder and flex shaft holder - all in one. Drill accurate perpendicular and angled holes. Holds your tool in place for applications like sanding and buffing, and the telescopic flex shaft holder extends to any height between 16 and 29 inches.
Brand: Yiking
Sand Paper Pack
99.00
Sandpaper is produced in a range of grit sizes and is used to remove material from surfaces, either to make them smoother (for example, in paintings and wood finishing), to remove a layer of material (such as 'old paint'), or sometimes to make the surface rougher (for example, as a preparation for gluing).
Various Grit - 80,100,120,200,300 - 5pcs each
Flexible Cutting Mat
549.00
Flexible Cutting Mats protect the countertops as well as other surfaces. These cutting mats are bendable and flexible for convenience, making it easy to funnel food directly into pans and other containers. These mats are color coded for different food groups.
A3 Size with Marked Pattern And Grids (18" * 12")
Brand: Ansio
Bent Nose Plier
249.00
Bent nose pliers are used in electronics where they are often be used in place of tweezers. These versatile pliers are also used in jewelry making.
Brand: Dee-Neers
Screw Driver
224.00
Screwdriver, usually hand-operated, for turning screws with slotted heads. For screws with one straight diametrical slot cut across the head, standard screwdrivers with flat blade tips and in a variety of sizes are used The screwdriver shank is made of tough steel, and the tip is hardened to minimize wear.
Digital Multi Meter Mastech
899.00
A digital multimeter is a test tool used to measure two or more electrical values—principally voltage (volts), current (amps) and resistance (ohms). It is a standard diagnostic tool for technicians in the electrical/electronic industries.
Soldering Wire (100gm)
249.00
Solder wire is made up of a fusible alloy (60/40 Sn/Pb), melting at 188°C (370°F), used to join less fusible metals or wires, etc. Solder wires are sold in spools or in bars Each metal requires a certain type of soldering wire to create strong bonds, because the combination of metals that constitute soldering wires melt at different temperatures.
Brand: Bond/Bharti
Stainless Steel Rule
29.00
A ruler, sometimes called a rule or line gauge, is a device used in geometry and technical drawing as well as the engineering and construction industries, to measure or draw straight lines.
Hacksaw Blade
149.00
A hacksaw blade is a fine-toothed saw, originally and mainly made for cutting metal...Most hacksaws blades are hand saws with a C-shaped frame that holds a blade under tension. Pack of 10 blades
Mini Hacksaw
99.00
A mini hacksaw is a fine-toothed saw, originally and mainly made for small cutting metal. Most hacksaws are hand saws with a C-shaped frame that holds a blade under tension. Such hacksaws have a handle, usually a pistol grip, with pinions to fasten narrow disposable blade at the ends.
Hacksaw Blades Mini
71.00
A hacksaw blade is a small fine-toothed saw, originally and mainly made for cutting thin (& small pieces of) metal. ... Most hacksaws blades are hand saws with a C-shaped frame that holds a blade under tension.
Spanner Set
899.00
A wrench or spanner is a tool used to provide grip and mechanical advantage in applying torque to turn objects usually rotary fasteners, such as nuts and bolts or keep them from turning The most common shapes are open ended and ring.
Brand: Dee-Neers
Adjustable Wrench Spanner
349.00
An adjustable wrench, also called an adjustable spanner or an adjustable crescent is a tool which can be used to loosen or tighten a nut or bolt. It has a "jaw" (the part where the nut or bolt fits), which is of adjustable size...Open the adjustable wrench by turning the screw mechanism.
Brand:De-Neers
Drill Bit Set
199.00
Drill bits are cutting tools used to remove material to create holes, almost always of circular cross-section...Drill bits come in standard sizes..
File Set
399.00
A file is a tool used to remove fine amounts of material from a workpiece. It is common in wood working, metal working, and other similar trade and hobby tasks. Most are hand tools, made of a case hardened steel bar of rectangular, square, triangular or round cross-section, with one or more surfaces cut with sharp, generally parallel teeth. A narrow, pointed tang is common at one end, to which a handle may be fitted.
6 Pcs. of 6 inches file each
Automobile Kit
4990.00
A four-stroke cycle engine is an internal combustion engine that utilizes fourdistinct piston strokes (intake, compression, power, and exhaust) to complete one operating cycle. The piston make two complete passes in the cylinder to complete one operating cycle.
Safety Gloves
249.00
The risk of cuts and abrasions can be minimized by wearing leather safety gloves. Then there are aluminized gloves, recommended for welding, furnace and foundry work as they provide reflective and insulating protection. Also available are Kevlar gloves which are used in quite a few industrial applications.
Cordless Rotary Multi Tool Set Black & Decker
4990.00
A cordless drill is an electric drill which uses rechargeable batteries. These drills are available with similar features to an AC mains-powered drill...They are available in the hammer drill configuration and most have a clutch, which aids in driving screws into various substrates while not damaging them.
Component Storage & Organizer box
2596.00
Taparia Plastic Tool Box with Organizer is sturdy and long lasting organizer for your tools and stuffs. It is available with metal rod hinges that help you carry more load easily. Store all the small objects and fasteners in the organiser sections available on the top.
Comes with 25 small separate boxes which can be drawn out.
Brand: Alkon
Precision Screw Driver Set
399.00
A screwdriver is a tool, manual or powered, for screwing (installing) and unscrewing (removing) screws. A typical simple screwdriver has a handle and a shaft, ending in a tip the user puts into the screw head before turning the handle. The shaft is usually made of tough steel to resist bending or twisting. The tip may be hardened to resist wear, treated with a dark tip coating for improved visual contrast between tip and screw or ridged or treated for additional 'grip'. Handles are typically wood, metal, or plastic[1] and usually hexagonal, square, or oval in cross-section to improve grip and prevent the tool from rolling when set down. Some manual screwdrivers have interchangeable tips that fit into a socket on the end of the shaft and are held in mechanically or magnetically. These often have a hollow handle that contains various types and sizes of tips, and a reversible ratchet action that allows multiple full turns without repositioning the tip or the user's hand.
Brand: De-Neers
Air Blower
999.00
Air Blower is very powerful and refills quickly. Air blower is designed for the cleaning of the camera lens, notebook computers, cameras, televisions, monitors, lcd screens, glasses, precision instruments and other items...Easy to use.
De-soldering Pump
99.00
A desoldering pump also known as solder sucker is a small mechanical device which sucks the liquid/molten solder from the joint where the components are mounted. In order to desolder a component from the PCB, we first heat up the solder joint with the soldering iron till the solder liquefies and melts.
Spirit Level
249.00
A spirit level is used for determining horizontal and vertical levels and can be used on a variety of DIY projects. A spirit level is designed to indicate whether a surface is levelled on the horizontal OR the vertical plane and there are a variety of sizes and designs too for different use cases.
Fire Extinguisher
1299.00
A fire extinguisher is an active fire protection aid used to extinguish or control small fires, often in emergency situations Typically, a fire extinguisher consists of a hand-held cylindrical pressure vessel containing an agent which can be discharged to extinguish a fire.
Servo Motor Tester
249.00
The Servo Motor Tester can be used to manually operate a servo motor clockwise and anti-clockwise direction. By pushing the forward or reverse button for a short period of time you can control the rotation of the servo. It will also test a servo. A Servo is a small device that has an output shaft. This shaft can be positioned to specific angular positions by sending the servo a coded signal. As long as the coded signal exists on the input line, the servo will maintain the angular position of the shaft. The angular position of the shaft is determined by the duration of a pulse that is applied to the control wire. This is called Pulse Coded Modulation.
In the Servo Motor Tester when using a servo motor in if it does not respond as per the input, how to make sure that the fault is not in the servo motor but the circuit or logic One way is to isolate the servo motor from the circuit and check its proper working by feeding it pulses of varying width and checking the angle that the servo motor turns to. Hear a 555 timer IC use to operate the servo motor. The circuit is designed to give control signals to the Servo. The LM555 timer IC is designed as an Astable multi vibrator which can give pulses for the operation of the Servo. BC547 is used here to amplify the signal of timer IC, as the current required by the servo motor is large
External Straight Plier
249.00
External Straight is a type of Plier used for straightening of wires & plates.
Brand: De-Neers
Nose Circlip Plier
239.00
Pliers made from high grade steel, forged and differentially heat-treated to give best performance. Fully insulated with quality plastic material sleeves ensures safe electrical working.
Brand: Dee-Neers
Needle Nose Plier
249.00
Needle-nose pliers (also known as pointy-nose pliers, long-nose pliers, pinch-nose pliers or snipe-nose pliers) are both cutting and holding pliers used by artisans, jewelry designers, electricians, network engineers and other tradesmen to bend, re-position and snip wires.
Brand: Dee-Neers
Soldering Wick
49.00
Desoldering braid, also known as desoldering wick or solder wick, is finely braided 18 to 42 AWG copper wire coated with rosin flux, usually supplied in a roll...The connections are heated with a soldering iron until the solder melts and is wicked into the braid by capillary action.
Bulb Holder
29.00
A bulb holder is a contraption that holds a bulb. The bulb holder is where the bulb fits. The holder also comprises of the electrical connection from the supply to the bulb.
Standard First Aid Kit
549.00
A basic first-aid kit contains plasters in a variety of different sizes and shapes. small, medium and large sterile gauze dressings. at least 2 sterile eye dressings,triangular bandages, anti-septic solutions/ creams, a regular sized crepe bandage, anti-burn cream.
Safety Mask 3M
199.00
A dust mask is a flexible pad held over the nose and mouth with the help of elastic or rubber straps to protect against dusts encountered during construction or cleaning activities viz. dusts from dry wall, brick, wood, fiberglass, silica (from ceramic or glass production),or even sweeping.
Glue Stick Pack
449.00
Glue sticks are common place adhesive used for everyday jointing/ fixing/ sticking applications. Hot melt adhesive (HMA), also known as 'hot glue', is a form of thermoplastic adhesive that is commonly sold as solid cylindrical sticks of various diameters designed to be applied using a 'hot glue gun'.
Pack of 50 gluesticks.
BO Motor with Wheel
119.00
The wheel is made up of high-quality rubber which gives maximum traction while operating. The wheel is strong and sturdy as it features nylon reinforced plastic rim. This wheel can be coupled to BO type motors by coupling it.
BO motor attached to the shaft, which is mechanically commutated electric motor powered from direct current (DC). Generally used in DIY projects, Battery operated toys, Radio controlled vehicles, Robotic projects etc.
Features:
- Working voltage of motor: 3-6V
- High Quality wheels with solid grip tyres
- Center hole of wheel: 5.3MM x 3.66MM
- Wheel size: 65x26mm
- Reduction Rate : 48:1
- Motor Weight : 50g
- Color: Yellow
Tweezer Set
199.00
Tweezers are small tools used for picking up objects too small to be easily handled with the human fingers. The word is most likely derived from tongs, pincers, or scissors-like pliers used to grab or hold hot objects since the dawn of recorded history.
Drill Machine Bosch GSB 450
2590.00
Drilling machine can be defined as a machine which makes a circular hole in the job by removing volume of the metal from it with the help of a cutting tool called drill bit. When drilling is performed by the drilling machine the drill bit i.e. the cutting tool is rotated along its own axis into the job.
Mini File set
199.00
A file is a tool used to remove fine amounts of material from a workpiece. It is common in woodworking, metalworking, and other similar trade and hobby tasks. Most are hand tools, made of a case hardened steel bar of rectangular, square, triangular, or round cross-section with one or more surfaces cut with sharp, generally parallel teeth. A narrow, pointed tang is common at one end, to which a handle may be fitted.
Digital Oscilloscope
21490.00
A digital oscilloscope is a complex electronic device composed of various software and electronic hardware modules that work together to capture, process, display and store data that represents the signals of interest of an operator.
- Brand: Owon
- Frequency: 20 Mhz
- No. of channels: 2
Soldering Bits - Bevel, Chisel & Conical
1499.00
BEVEL TIP Bevel tip can be used for solder jobs that require pre-loading the iron with solder.
CHISEL TIP This tip is great for soldering wires, through-hole components, large surface-mount components, and for desoldering as well.
CONICAL TIP Conical tips are usually used for precision electronics work, though they’re also often used for general soldering.
Each type comes in 5 nos. each. Total pack of 15 solder bits.