Modules

Node MCU

399.00

MQ5 Methane Liquified Gas Sensor

199.00

MQ8 Hydrogen Gas Sensor Module

199.00

16x2 LCD

149.00

Temperature & Humidity Sensor DHT 11

149.00

Capacitive Touch Switch Module

99.00

Breadboard - 800 Points

89.00

16x2 LCD

16x2 LCD

 149.00

LCD (Liquid Crystal Display) screen is an electronic display module and find a wide range of applications. A 16x2 LCD display is very basic module and is very commonly used in various devices and circuits. These modules are preferred over seven segments and other multi segment LEDs. A 16x2 LCD means it can display 16 characters per line and there are 2 such lines. In this LCD each character is displayed in 5x7 pixel matrix. This LCD has two registers, namely, Command and Data.

Features:

  • 5 x 8 dots with cursor
  • Built-in controller (KS 0066 or Equivalent)
  • +5V power supply (Also available for + 3V)
  • 1/16 duty cycle
  • H/L to be driven by pin 1, pin 2 or pin 15, pin 16 or A.K (LED)
  • N.V. optional for + 3V power supply

Breadboard - 800 Points

Breadboard - 800 Points

 89.00

A breadboard is a solderless device for temporary prototype with electronics and test circuit designs. Breadboards are used for rapid prototyping of electronic projects, without needing to solder the components to make it work. Most electronic components in electronic circuits can be interconnected by inserting their leads or terminals into the holes and then making connections through wires where appropriate. The breadboard has strips of metal underneath the board and connects the holes on the top of the board.

This is a Full size breadboard or standard size breadboard with 800 tie points, the breadboard measures 55mm x 170mm, you can combine two or more of this breadboard to make larger or wider breadboards, it also includes an adhesive foam at the back, to mount it securely on most surfaces.

Node MCU

Node MCU

 399.00

NodeMCU is an open source IoT platform. It includes firmware which runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module.

MQ5 Methane Liquified Gas Sensor

MQ5 Methane Liquified Gas Sensor

 199.00

The Grove -Gas Sensor(MQ5) module is useful for gas leakage detection (in home and industry). It is suitable for detecting H2, LPG, CH4, CO, Alcohol the detection of certain components in the air usually requires a more precise and costly instrument, which cannot be done with a single gas sensor.

Capacitive Touch Switch Module

Capacitive Touch Switch Module

 99.00

This device uses your body as part of the circuit. When you touch the sensor pad, the capacitance of the circuit is changed and is detected.  That detected change in capacitance results in the output changing states.

 

MQ8 Hydrogen Gas Sensor Module

MQ8 Hydrogen Gas Sensor Module

 199.00

A sensitive material MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection use in clean air low conductivity tin oxide (SnO2). When there is the environment in which the combustible gas sensor, conductivity sensor with increasing concentration of combustible gases in air increases.

Temperature & Humidity Sensor DHT 11

Temperature & Humidity Sensor DHT 11

 149.00

This DHT11 Temperature and Humidity Sensor features a calibrated digital signal output with the temperature and humidity sensor capability. It is integrated with a high performance 8-bit microcontroller. It's technology ensures the high reliability and excellent long-term stability. This sensor includes a resistive element and a sensor for wet NTC temperature measuring devices. It has excellent quality, fast response, anti-interference ability and high performance.