A solder paste is essentially powder metal solder suspended in a thick medium called flux. Flux is added to act as a temporary adhesive, holding the components until the soldering process melts the solder and fuses the parts together. The paste is a grey, putty-like material.
An adapter is a physical device that allows one hardware or electronic interface to be adapted (accommodated without loss of function) to another hardware or electronic interface. In a computer, an adapter is often built into a card that can be inserted into a slot on the computer's motherboard.
An adapter 12V 2A is a physical device that allows one hardware or electronic interface to be adapted (accommodated without loss of function) to another hardware or electronic interface. In a computer, an adapter is often built into a card that can be inserted into a slot on the computer's motherboard.
A ratcheting screwdriver is used for tightening and loosening screws the advantage of a ratcheting screwdriver over a regular screwdriver is that the user needs to keep their hands in the same position while holding the handle and has to rotate the handle to set the screw.
Brand: CIC - 41 Pcs.
A hot glue gun is a very useful tool for joining modelling materials and even stronger material can be fixed together with it. 'Sticks' of solid glue are pushed into the back of the gun, the trigger is pressed pushing the glue stick forward and molten glue comes out of the nozzle.
Unlike other soldering iron features a specific characteristic of variable wattage.The changing wattage setting makes it the most versatile and useful for various types of applications.The temperature range of the iron is 28C to 45C with hi-tech printed ceramic heater for high-end use. The wattage setting is convenient, which makes it quite user friendly while handling. It comes with aluminum-coated bit for long lasting life.
This is a Temperature Controlled Soldering Iron. It is with ceramic heater and has a very high heat recovery characteristic. Its bits can be changed easily. Various bits can be used with this iron as per the requirement. All bits are Iron Plated and Tin covered. Temperature adjustment is easy. Set is supplied with stand to hold soldering iron and sponge.
Black & Decker HG1300 Dual Temperature Heat Gun has 2 temperature settings (750C and 1000C) used for a variety of applications. It can be used for removing paint and varnish, loosening rusted nuts and bolts, thaw frozen pipes, or quick dry almost anything.
The tip of the tester is touched to the conductor being tested (for instance, it can be used on a wire in a switch, or inserted into a hole of an electric socket). A neon lamp takes very little current to light, and thus can use the user's body capacitance to earth ground to complete the circuit.
These pliers can bend, cut and grip where fingers and other tools are too big or clumsy. Needle-nose pliers are good for reaching into tight spots where regular pliers are unwieldy. They can grip multiple wires and even pick up small screws with a strong secure grip.
The holes are used to accept pegs or hooks to support various items, such as tools in a workshop. Peg-Board is an expired trademark used as a brand name by the Masonite Corporation, first used in 1962, which is often used as a generic term for perforated storage boards made of hard board, wood, metal, or other material.
A ball peen hammer is a good choice for working with metals. Its steel head is harder than that of a claw hammer, so is less likely to chip on impact. Ball peen hammers are commonly used to drive cold chisels, set rivets as well as bend and shape metal.
A claw hammer is a tool primarily used for driving nails into, or pulling nails from some other object It is not suitable for heavy hammering on metal surfaces (such as in machining works), as the steel of its head is somewhat brittle the ball-peen hammer is more suitable for such metal work.
The Dremel 220 Workstation Combined Drill Press and Tool Holder is a drill press, tool holder and flex shaft holder - all in one. Drill accurate perpendicular and angled holes. Holds your tool in place for applications like sanding and buffing, and the telescopic flex shaft holder extends to any height between 16 and 29 inches.
Flexible Cutting Mats protect the countertops as well as other surfaces. These cutting mats are bendable and flexible for convenience, making it easy to funnel food directly into pans and other containers. These mats are color coded for different food groups.
A3 Size with Marked Pattern And Grids (18" * 12")
Screwdriver, usually hand-operated, for turning screws with slotted heads. For screws with one straight diametrical slot cut across the head, standard screwdrivers with flat blade tips and in a variety of sizes are used The screwdriver shank is made of tough steel, and the tip is hardened to minimize wear.
Solder wire is made up of a fusible alloy (60/40 Sn/Pb), melting at 188°C (370°F), used to join less fusible metals or wires, etc. Solder wires are sold in spools or in bars Each metal requires a certain type of soldering wire to create strong bonds, because the combination of metals that constitute soldering wires melt at different temperatures.
A mini hacksaw is a fine-toothed saw, originally and mainly made for small cutting metal. Most hacksaws are hand saws with a C-shaped frame that holds a blade under tension. Such hacksaws have a handle, usually a pistol grip, with pinions to fasten narrow disposable blade at the ends.
An adjustable wrench, also called an adjustable spanner or an adjustable crescent is a tool which can be used to loosen or tighten a nut or bolt. It has a "jaw" (the part where the nut or bolt fits), which is of adjustable size...Open the adjustable wrench by turning the screw mechanism.
A file is a tool used to remove fine amounts of material from a workpiece. It is common in wood working, metal working, and other similar trade and hobby tasks. Most are hand tools, made of a case hardened steel bar of rectangular, square, triangular or round cross-section, with one or more surfaces cut with sharp, generally parallel teeth. A narrow, pointed tang is common at one end, to which a handle may be fitted.
6 Pcs. of 6 inches file each
A cordless drill is an electric drill which uses rechargeable batteries. These drills are available with similar features to an AC mains-powered drill...They are available in the hammer drill configuration and most have a clutch, which aids in driving screws into various substrates while not damaging them.
Taparia Plastic Tool Box with Organizer is sturdy and long lasting organizer for your tools and stuffs. It is available with metal rod hinges that help you carry more load easily. Store all the small objects and fasteners in the organiser sections available on the top.
Comes with 25 small separate boxes which can be drawn out.
A screwdriver is a tool, manual or powered, for screwing (installing) and unscrewing (removing) screws. A typical simple screwdriver has a handle and a shaft, ending in a tip the user puts into the screw head before turning the handle. The shaft is usually made of tough steel to resist bending or twisting. The tip may be hardened to resist wear, treated with a dark tip coating for improved visual contrast between tip and screw or ridged or treated for additional 'grip'. Handles are typically wood, metal, or plastic and usually hexagonal, square, or oval in cross-section to improve grip and prevent the tool from rolling when set down. Some manual screwdrivers have interchangeable tips that fit into a socket on the end of the shaft and are held in mechanically or magnetically. These often have a hollow handle that contains various types and sizes of tips, and a reversible ratchet action that allows multiple full turns without repositioning the tip or the user's hand.
A desoldering pump also known as solder sucker is a small mechanical device which sucks the liquid/molten solder from the joint where the components are mounted. In order to desolder a component from the PCB, we first heat up the solder joint with the soldering iron till the solder liquefies and melts.
A spirit level is used for determining horizontal and vertical levels and can be used on a variety of DIY projects. A spirit level is designed to indicate whether a surface is levelled on the horizontal OR the vertical plane and there are a variety of sizes and designs too for different use cases.
Needle-nose pliers (also known as pointy-nose pliers, long-nose pliers, pinch-nose pliers or snipe-nose pliers) are both cutting and holding pliers used by artisans, jewelry designers, electricians, network engineers and other tradesmen to bend, re-position and snip wires.
Desoldering braid, also known as desoldering wick or solder wick, is finely braided 18 to 42 AWG copper wire coated with rosin flux, usually supplied in a roll...The connections are heated with a soldering iron until the solder melts and is wicked into the braid by capillary action.
A breadboard is a solderless device for temporary prototype with electronics and test circuit designs. Breadboards are used for rapid prototyping of electronic projects, without needing to solder the components to make it work. Most electronic components in electronic circuits can be interconnected by inserting their leads or terminals into the holes and then making connections through wires where appropriate. The breadboard has strips of metal underneath the board and connects the holes on the top of the board.
This is a Full size breadboard or standard size breadboard with 800 tie points, the breadboard measures 55mm x 170mm, you can combine two or more of this breadboard to make larger or wider breadboards, it also includes an adhesive foam at the back, to mount it securely on most surfaces.
Drilling machine can be defined as a machine which makes a circular hole in the job by removing volume of the metal from it with the help of a cutting tool called drill bit. When drilling is performed by the drilling machine the drill bit i.e. the cutting tool is rotated along its own axis into the job.
A file is a tool used to remove fine amounts of material from a workpiece. It is common in woodworking, metalworking, and other similar trade and hobby tasks. Most are hand tools, made of a case hardened steel bar of rectangular, square, triangular, or round cross-section with one or more surfaces cut with sharp, generally parallel teeth. A narrow, pointed tang is common at one end, to which a handle may be fitted.
A digital oscilloscope is a complex electronic device composed of various software and electronic hardware modules that work together to capture, process, display and store data that represents the signals of interest of an operator.
- Brand: Owon
- Frequency: 20 Mhz
- No. of channels: 2
BEVEL TIP Bevel tip can be used for solder jobs that require pre-loading the iron with solder.
CHISEL TIP This tip is great for soldering wires, through-hole components, large surface-mount components, and for desoldering as well.
CONICAL TIP Conical tips are usually used for precision electronics work, though they’re also often used for general soldering.
Each type comes in 5 nos. each. Total pack of 15 solder bits.
A telescope is an optical instrument that makes distant objects appear magnified by using an arrangement of lenses or curved mirrors and lenses, or various devices used to observe distant objects by their emission, absorption, or reflection of electromagnetic radiation.
All glass optical components Altazimuth mount suitable for terrestrial and astronomical use minimum 50 mm focal length
Brand: Celestron 50 AZ
Sewing is the craft of fastening or attaching objects using stitches made with a needle and thread. Sewing is one of the oldest of the textile arts, arising in the Paleolithic era.
Before the invention of spinning yarn or weaving fabric, archaeologists believe Stone Age people across Europe and Asia sewed fur and skin clothing using bone, antler or ivory needles and "thread" made of various animal body parts including sinew, catgut, and veins.