DIY Tinkering

Raspberry Pi Tinkering Kit

6990.00

Arduino Tinkering Kit Pro+

3990.00

Robotics Tinkering Kit

2990.00

Arduino Tinkering Kit Pro

2490.00

Electronics Tinkering Kit Pro+

1490.00

Electronics Tinkering Kit Pro

990.00

BO Motor with Wheel

119.00

Breadboard - 800 Points

89.00

Electronics Tinkering Kit Pro

Electronics Tinkering Kit Pro

 990.00

Electronics Tinkering Kit Pro is best suited for students who are Electronics enthusiasts and are interested in learning electronic projects prototyping. It explores the basic concepts of the included electronic components. The kit comprises of all standard components required for hassle free and outcome based learning. Every component included in the kit plays a significant role. The kit includes comprehensive documentation making it easier to understand, learn & build.

Key features of the 'Electronics Tinkering Pro' kit are:-

  • The kit contains various electronic components including ICs, Active Elements, Discrete Components & other Elements including IC-555, ICUM-66, ICLM-358, Transistors, Diode 4007, DC Motors, Condenser Mic, Touch Plate.
  • A number of projects can be built using this kit viz are Automatic Street Light Controller, Melody Generator, Clap Switch, LED Blinking using Transistor.
  • The kit includes comprehensive Documentation explaining the concepts behind every component as well as step by step instructions to use the same.
  • The kit conforms to all common safety & environmental standards, is completely safe to use.


Components included in the kit:-

  • IC 555
  • IC UM66
  • IC LM358
  • Transistors - BC547 & 557
  • Diode 4007
  • DC Motor
  • Condenser Mic
  • Touch Plate (Piezo Disc (thin))
  • LDR
  • Speaker 8Ohm
  • 15cm Single-Strand Wire Antenna
  • Variable Resistor 10KOhm
  • Resistors - Different Values 
  • Ceramic Capacitor - 104
  • Electrolytic Capacitors 
  • Push Button Switches
  • LED - Red
  • Buzzer
  • Breadboard
  • Battery - 9V
  • Battery Cap + Lead

Electronics Tinkering Kit Pro+

Electronics Tinkering Kit Pro+

 1490.00

Electronics Tinkering kit pro+ is an Advanced-level kit for Electronics & STEM Enthusiasts for learning Electronics prototyping & advanced projects building students can learn advanced level integration of different ICs, Active Elements, Discrete Components and other elements not covered in the Pro tinkering kit Students can do some serious self-paced higher level learning using this tinkering kit, with comprehensive Documentation provided that eases the process a great deal diving into the concepts of every component, besides step-by-step instructions on the use of the same.

Key features of the 'Electronics Tinkering Pro+' kit are:-

  • The kit contains a number of electronic components including various types of ICs, Transistor BC547, Diode 4001, Diode 4007, Temperature Sensor - LM35, a Touch Plate (Piezo disc (thin)), a 7-Segment LED Display, an IR Transmitter & Receiver, a Condenser Mic, DC Motors..
  • A whole lot of electronic circuits & projects can be built using the provided components, viz. LED Blinking using a Timer, Touch-on-Touch-off Switch, Object Detector using IR Sensor, LED Bar Graph.
  • Includes comprehensive Documentation explaining the concept(s) behind every component as well as step-by-step instructions on how to use the same in building prototypes.
  • The kit conforms to all common safety & environmental standards, is completely safe to use.

Components included in the kit are:-

  • IC 555 - Timer
  • IC LM358 - Diff. Opamp
  • IC LM35 - Temp Sensor
  • Transistor - BC547
  • Diode - 4001
  • Diode - 4007
  • DC Motor
  • Condenser Mic
  • Touch Plate (Piezo Disc (thin))
  • LDR
  • Speaker - 8Ohm
  • Small Fan Blade
  • Variable Resistor - 10KOhm
  • Resistors - Different Values 
  • Ceramic Capacitor - 104
  • Capacitors - Different Types & Values 
  • Push Button Switches
  • LED - Red, Yellow
  • Buzzer
  • Breadboard
  • Battery - 9V
  • Battery Cap + Lead

Arduino Tinkering Kit Pro

Arduino Tinkering Kit Pro

 2490.00

Arduino Tinkering Kit 'Pro' is a DIY kit designed for a beginner enthusiast who is interested in learning the Arduino ecosystem and build embedded solutions using the same. Arduino is an open-source mini-electronics platform with an easy-to-use hardware and software.This kit explores the concepts behind each component included, comprising of all standard ones. Accompanied with comprehensive documentation on the use of every component, this kit ensures hassle-free learning, making it extremely easy for the enthusiast.

Key features of the 'Arduino Tinkering Pro' Kit are:-

  • Contains an Arduino UNO MCU Board along with Shields, Modules, Discrete Components, Accessories including Motor Driver Shield - L293D, LDR, PIR Sensor, TSOP IR Sensor, Smoke sensor...7-segment LED Display, LRM 595 IC, LEDs, LCD module - 16x2..
  • Using this kit a number of small projects can be built viz. LED Interfacing, Switch Interfacing, 7-Segment Interfacing, Motor Driver Shield & DC Motors Interfacing...
  • Includes comprehensive Documentation providing step-by-step instructions to use various modules & elements included, integrating the same with the UNO processing board as well as the 'C++ programming' required to be done to ensure the pieced together bot/ kit works on expected lines..
  • The kit conforms to all common safety & environmental standards, is completely safe to use!

 

'Components' included in the kit are:

  • Arduino 'Uno' board
  • 7-Segment LED Display
  • LRM595
  • Different LEDs
  • LDR
  • LCD Display Module - 16x2
  • Resistors - Different Values
  • PIR Sensor
  • DC Motor - Ceepee
  • L293D Driver IC
  • TSOP IR Sensor Module
  • Analog IR Sensor module
  • Keypad Matrix - 4x4
  • Smoke Detector Sensor - MQ2
  • Breadboard
  • USB cable - Type A-to-Mini B
  • Jumper Wires

 

Arduino Tinkering Kit Pro+

Arduino Tinkering Kit Pro+

 3990.00

Arduino Tinkering Kit Pro+ is an advanced DIY kit for the Embedded & Arduino Enthusiasts for learning Arduino-based project/ solution prototyping.The user can learn advanced interfacing of various modules with the 'Uno' board, ones that are not covered in the 'Pro' tinkering kit. The kit comprises of all standard components, aiding the user in self-paced, hassle-free advanced activities-based learning. Comprehensive documentation is provided with this kit which renders the learning all the more simpler.

As we are aware, Arduino is an open-source embedded platform based on easy-to-use hardware and software, one can get into integration of various bots & kits pretty quickly! These can be deployed in solving 'real-life' problems as well as 'automate' a whole lot of tasks/ activities one finds being carried out manually in his/ her everyday life.

Key features of the 'Arduino Tinkering Pro+' Kit are:-

  • Contains an Arduino UNO MCU Board along with Modules & other elements including a BT Module - HC-05, Ultrasonic Sensor HC-SR04, GSM Module - SIM900, RFID Reader - EM18.
  • A whole lot of advanced level interfacing & integration can be done leading to building projects/ prototypes viz. ADC Interfacing, Interrupt Interfacing, PWM Interfacing, LED Control using BT, GSM Module Interfacing.
  • Includes comprehensive documentation providing step-by-step instructions on how to use various modules & elements included in the kit along with the UNO processing board, besides practicing 'C++ programming' eventually putting them all together in a manner that ensures outcomes on expected lines
  • The kit conforms to all common safety & environmental standards, is completely safe to use.


'Components' included in the kit are:-

  • Arduino 'Uno' Board
  • Bluetooth Module - HC05
  • Ultrasonic Echo Sensor - HC SR04
  • GSM Module - SIM900
  • RFID Reader - EM18
  • RFID Card
  • LCD 16x2
  • Resistors - 200Ohm
  • LED - 5mm, Red
  • LED - 5mm, Yellow
  • LED - 5mm, Green
  • Breadboard
  • Jumper wire meter
  • Jumper Wires F-F
  • Jumper Wires M-M
  • USB Cable Type A-B
  • 9V battery with connector

Robotics Tinkering Kit

Robotics Tinkering Kit

 2990.00

Robotics Tinkering Kit is a self-paced DIY learning kit for Robotics enthusiasts who are interested in learning Electro-mechanics as well as Automation Building Problem-solving Bots using the Arduino ecosystem, including the embedded C++ programming required.

When one builds Robots with Sense-Trigger capabilities, one learns various aspects of Science, Technology, Engineering & Math (STEM) besides, off-course, the Structures & Motion kinematics of the Bots.

The kit contains all the components required for hassle-free 'Multi-function' Robotics learning

It is accompanied with comprehensive documentation, containing Datasheets, 'Application Notes' and Sample Programs, which greatly eases the learning process.

Key features of the 'Robotics Tinkering' kit are:-

  • Contains an Arduino 'Uno' MCU Board along with Shields, Modules and Accessories including Motor Driver Shield, BO Motors, Gears, Wheels, Analog IR Sensor, Touch Sensor, Bluetooth HC-05, LCD - 16x2..
  • Includes the latest version of the Arduino IDE with a few sample programs and an introductory guide to programming for rank beginners..
  • A number of multi-function' bot models can be built using this kit exhibiting various capabilities viz. Go Fast Robot, 4WD Robot, Line Counter Robot, BT CarBot..
  • Includes comprehensive documentation including Datasheets and 'Application Notes' providing step-by-step instructions on how to use the diffferent parts - Shields, Modules & Other Elements along with the UNO processing board, also on coding as stated above with a couple of Sample Programs included..
  • The kit conforms to all common safety & environmental standards, is completely safe to use.

Components' included in the kit are:

  • Arduino Uno Board
  • Motor Driver Shield - L298
  • Analog IR Sensor
  • Touch Sensor
  • Mini Breadboard
  • LCD Module - 16x2
  • Robotics Accessories – Metal strips, bars, Gears, BO Motors, Wheels, Nuts & Screws etc.
  • USB Cable - Type A to B
  • 12V Adapter
  • 6xAA Battery Holder with DC Jack
  • Bluetooth Module - HC05
  • Single-Pin Burge Strips (F2F, M2M, M2F)

Raspberry Pi Tinkering Kit

Raspberry Pi Tinkering Kit

 6990.00

'Raspberry Pi Tinkering' kit is the perfect aid to consolidate one's hold of the 'Embedded Systems' domain...and move on to the newer technologies of today IoT, EI & AI!!

Raspberry Pi is the SBC (Single Board Computer) of choice with the following 'hardware' features that render it so 'potent':

  • Raspberry Pi 3 B+ board
  • 1.4GHz 64-bit quad-core processor
  • Dual-band Wireless LAN - 2.4/5GHz. 802.11b/g/n/ac
  • Fast Ethernet - 10/100 w/ Power-over-Ethernet support (HAT)
  • Bluetooth 4.2/BLE
  • HDMI - 4K/ FHD
  • Comp AV
  • CSI & DSI Interafces
  • Serial TTL, SPI, I2C, I2S, PWM, Ext. Interrupts, GPIOs

On top of the state-of-the-art hardware mentioned above, R Pi comes with a Linux (Debian) variant, Raspbian, providing for an extremely secure, robust OS platform which is any administrator's delight - what with the tweaks that one can apply, including the ones at the 'kernel' level that can add higher levels of performance, security & even functionality to the board!

The kit has been very thoughtfully made with every component, designed by our experts deploying cutting-edge techniques, playing a significant role in ensuring smooth, seamless learning of the technologies of today! One can build almost anything under the Sun - Automation - Local/ Remote, IoT, EI or/ and AI solutions/ projects using this kit...

'Components' included in the kit are:

  • 8 GB memory card
  • 5V/2.5A Adapter with Micro USB Cable
  • LED - Red
  • Push Button Switch
  • IR Sensor Module
  • LDR
  • 7-segment LED Display
  • LCD Module - 16x2
  • L293 Driver IC
  • DC Motor
  • Ultrasonic Sensor HC SR04
  • LM35 Temperature sensor
  • ADC 0804 IC
  • PIR Sensor Module
  • Variable Resistor - 10K
  • Resistors - Different Values
  • Capacitors - Different Types & Values
  • Breadboard
  • Jumper Wires - M-M
  • Jumper Wires - F-F
  • 9V battery

Breadboard - 800 Points

Breadboard - 800 Points

 89.00

A breadboard is a solderless device for temporary prototype with electronics and test circuit designs. Breadboards are used for rapid prototyping of electronic projects, without needing to solder the components to make it work. Most electronic components in electronic circuits can be interconnected by inserting their leads or terminals into the holes and then making connections through wires where appropriate. The breadboard has strips of metal underneath the board and connects the holes on the top of the board.

This is a Full size breadboard or standard size breadboard with 800 tie points, the breadboard measures 55mm x 170mm, you can combine two or more of this breadboard to make larger or wider breadboards, it also includes an adhesive foam at the back, to mount it securely on most surfaces.

BO Motor with Wheel

BO Motor with Wheel

 119.00

The wheel is made up of high-quality rubber which gives maximum traction while operating. The wheel is strong and sturdy as it features nylon reinforced plastic rim. This wheel can be coupled to BO type motors by coupling it.

BO motor attached to the shaft, which is mechanically commutated electric motor powered from direct current (DC). Generally used in DIY projects, Battery operated toys, Radio controlled vehicles, Robotic projects etc.

Features:

  • Working voltage of motor: 3-6V
  • High Quality wheels with solid grip tyres
  • Center hole of wheel: 5.3MM x 3.66MM
  • Wheel size: 65x26mm
  • Reduction Rate : 48:1
  • Motor Weight : 50g
  • Color: Yellow