A solder paste is essentially powder metal solder suspended in a thick medium called flux. Flux is added to act as a temporary adhesive, holding the components until the soldering process melts the solder and fuses the parts together. The paste is a grey, putty-like material.
Hot Glue Gun
A hot glue gun is a very useful tool for joining modelling materials and even stronger material can be fixed together with it. 'Sticks' of solid glue are pushed into the back of the gun, the trigger is pressed pushing the glue stick forward and molten glue comes out of the nozzle.
Soldering Station Siron
Unlike other soldering iron features a specific characteristic of variable wattage.The changing wattage setting makes it the most versatile and useful for various types of applications.The temperature range of the iron is 28C to 45C with hi-tech printed ceramic heater for high-end use. The wattage setting is convenient, which makes it quite user friendly while handling. It comes with aluminum-coated bit for long lasting life.
This is a Temperature Controlled Soldering Iron. It is with ceramic heater and has a very high heat recovery characteristic. Its bits can be changed easily. Various bits can be used with this iron as per the requirement. All bits are Iron Plated and Tin covered. Temperature adjustment is easy. Set is supplied with stand to hold soldering iron and sponge.
Dual Temperature Heat Gun Stanley
Black & Decker HG1300 Dual Temperature Heat Gun has 2 temperature settings (750C and 1000C) used for a variety of applications. It can be used for removing paint and varnish, loosening rusted nuts and bolts, thaw frozen pipes, or quick dry almost anything.
Soldering Helping Hand
A helping hand or also called 'third hand' is a stand with two flexible clamps that hold pieces in place for you, leaving your hands free to perform your work. It is really handy in jobs like soldering, jewelry making and other crafts.
Soldering Wire (100gm)
Solder wire is made up of a fusible alloy (60/40 Sn/Pb), melting at 188°C (370°F), used to join less fusible metals or wires, etc. Solder wires are sold in spools or in bars Each metal requires a certain type of soldering wire to create strong bonds, because the combination of metals that constitute soldering wires melt at different temperatures.
A desoldering pump also known as solder sucker is a small mechanical device which sucks the liquid/molten solder from the joint where the components are mounted. In order to desolder a component from the PCB, we first heat up the solder joint with the soldering iron till the solder liquefies and melts.
Servo Motor Tester
The Servo Motor Tester can be used to manually operate a servo motor clockwise and anti-clockwise direction. By pushing the forward or reverse button for a short period of time you can control the rotation of the servo. It will also test a servo. A Servo is a small device that has an output shaft. This shaft can be positioned to specific angular positions by sending the servo a coded signal. As long as the coded signal exists on the input line, the servo will maintain the angular position of the shaft. The angular position of the shaft is determined by the duration of a pulse that is applied to the control wire. This is called Pulse Coded Modulation.
In the Servo Motor Tester when using a servo motor in if it does not respond as per the input, how to make sure that the fault is not in the servo motor but the circuit or logic One way is to isolate the servo motor from the circuit and check its proper working by feeding it pulses of varying width and checking the angle that the servo motor turns to. Hear a 555 timer IC use to operate the servo motor. The circuit is designed to give control signals to the Servo. The LM555 timer IC is designed as an Astable multi vibrator which can give pulses for the operation of the Servo. BC547 is used here to amplify the signal of timer IC, as the current required by the servo motor is large
Desoldering braid, also known as desoldering wick or solder wick, is finely braided 18 to 42 AWG copper wire coated with rosin flux, usually supplied in a roll...The connections are heated with a soldering iron until the solder melts and is wicked into the braid by capillary action.
A bulb holder is a contraption that holds a bulb. The bulb holder is where the bulb fits. The holder also comprises of the electrical connection from the supply to the bulb.
BO Motor with Wheel
The wheel is made up of high-quality rubber which gives maximum traction while operating. The wheel is strong and sturdy as it features nylon reinforced plastic rim. This wheel can be coupled to BO type motors by coupling it.
BO motor attached to the shaft, which is mechanically commutated electric motor powered from direct current (DC). Generally used in DIY projects, Battery operated toys, Radio controlled vehicles, Robotic projects etc.
- Working voltage of motor: 3-6V
- High Quality wheels with solid grip tyres
- Center hole of wheel: 5.3MM x 3.66MM
- Wheel size: 65x26mm
- Reduction Rate : 48:1
- Motor Weight : 50g
- Color: Yellow
Rechargeable Battery Charger
- Specially designed for 9 Volt Li-Ion Rechargeable batteries
- Input: 100 - 240 VAC 50/60 Hz
- Output: 8.4V 300 mAh
- Dimension: 3.5'' L x 1.5'' W x 1" H.
- Multi Voltage for International Travel
- Power Portable
- Built in IC to cut off power automatically when battery is fully charge
- Intelligent charger designed for all types of 7.2V (2 cells) Li-Ion / Li-Poly Battery packs.
- 9V two button connector installed on the charger
- Red LED indicate battery is charging, and Green LED shows full. (LED also is Green without battery)
- Compact size and lightweight easy to carry for RC air/car
Should only be used with:
9 Volt Powerizer Lithium Ion Battery (500 mAh)
A digital oscilloscope is a complex electronic device composed of various software and electronic hardware modules that work together to capture, process, display and store data that represents the signals of interest of an operator.
- Brand: Owon
- Frequency: 20 Mhz
- No. of channels: 2