89.00
399.00
99.00
99.00
799.00
Breadboard - 800 Points
89.00
A breadboard is a solderless device for temporary prototype with electronics and test circuit designs. Breadboards are used for rapid prototyping of electronic projects, without needing to solder the components to make it work. Most electronic components in electronic circuits can be interconnected by inserting their leads or terminals into the holes and then making connections through wires where appropriate. The breadboard has strips of metal underneath the board and connects the holes on the top of the board.
This is a Full size breadboard or standard size breadboard with 800 tie points, the breadboard measures 55mm x 170mm, you can combine two or more of this breadboard to make larger or wider breadboards, it also includes an adhesive foam at the back, to mount it securely on most surfaces.
Node MCU
399.00
NodeMCU is an open source IoT platform. It includes firmware which runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module.
LEDs - Yellow
99.00
A light-emitting diode (LED) is a semiconductor light source that emits light when current flows through it. Electrons in the semiconductor recombine with electron holes, releasing energy in the form of photons. The color of the light (corresponding to the energy of the photons) is determined by the energy required for electrons to cross the band gap of the semiconductor.
">
LEDs - White
99.00
A light-emitting diode (LED) is a semiconductor light source that emits light when current flows through it. Electrons in the semiconductor recombine with electron holes, releasing energy in the form of photons. The color of the light (corresponding to the energy of the photons) is determined by the energy required for electrons to cross the band gap of the semiconductor.
Button Switch Set
799.00
A push-button (also spelled pushbutton) or simply button is a simple switch mechanism for controlling some aspect of a machine or a process. Buttons are typically made out of hard material, usually plastic or metal. The surface is usually flat or shaped to accommodate the human finger or hand, so as to be easily depressed or pushed.